Specifications
|
Length Overall | 36" (914 mm) |
| Beam | 8.5" |
| Draft | 10" |
| Rig Height above deck | 48" |
| Bottom of keel to top of mast | 59" |
| Sail Area | 585 sq. in. |
| Displacement | 6 lbs. 4 oz. |
Features
- Hull and deck molded in one piece white ABS plastic
- Mast and booms are 3/8" OD. Aluminum tubing
- Mast is supported by a three spreader system of standing rigging. All rigging is 100 # test spectra string.
- Sails are single panel polished dacron with printed seams
- Deck hardware molded in black plastic.
- Keel and rudder remove easily for storage
- Comes with scissor cradle for display
- Easy access to electronics compartment via sliding hatch.
- Sail and deck numbers sent when owner registers boat.
- All parts are interchangeable and inexpensive to replace.
- Comes with Hitec Ranger II radio control system (two channel, steering and sail control). Batteries not included - requires 12 ea AA batteries, either alkaline or rechargeable.
- Boat is corrosion resistant and salt water safe.
- Very strict one design racing rule.
The CR-914 is available for purchase as a Kit or Ready-to-Race. The kit includes everything you need to build this boat in approximately 50 hours - all electronics, rigging, lead, epoxy, CA glue, and sails. Order Now. For information on having your boat professionally built for you - called Ready-to-Race, click here.
|
